"Uconnect Not Available" error (RER Only)

"Uconnect Not Available" error (RER Only)

Press and hold the seek up and down buttons simultaneously and the menu button on the faceplate of the radio. An engineering menu will appear. Select the option "Enable JK, etc."


    • Related Articles

    • Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR

      After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...

    • UConnect Jumper Kit Information

      Product page can be found by clicking on this link The UConnect Jumper kit is designed to allow you to retain use of your factory microphone when upgrading to an RER or RHR navigation radio.   For the RER, the jumper cable is used, the USB cable in ...

    • Bluetooth not pairing in RER or RHR

      If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER and RHR Engineering Menu: SEEK ...

    • RER & RHR Engineering Mode (Resetting the radio)

      RER and RHR Engineering Menu: SEEK UP/DOWN and MENU, then click Accept at the warning screen. DO NOT DO A SCREEN CALIBRATION UNDER ANY CIRCUMSTANCES Go down a page or two, and you should see "Factory Default Reset" or "Factory Reset" and after ...

    • RER / RHR randomly switching AM / FM stations

      If your RER or RHR radio is randomly scrolling through AM or FM stations, your SCAN icon is likely pressed. Simply press it again to fix this issue.