Do we Calibrate Vibration Meters and Sensors of make different than IRD Mechanalysis Limited?

Do we Calibrate Vibration Meters and Sensors of make different than IRD Mechanalysis Limited?

The answer is both Yes and No.

Why Yes?

We have a Calibrator that is able to generate a controlled vibration i.e a pure sine wave of a controlled frequency and controlled amplitude with a high accuracy and precision. Using this Calibrator, we can check Any Vibration Sensor and Any Vibration Meter and issue a National Traceable Calibration Report.

Why No?

People often mix the terms Calibration and Recalibration. We know how to Calibrate and Recalibrate our make of Vibration Meters and Sensors because they are our design. We know which components to tinker with to make the Calibration right (recalibrate). However, when there is a Vibration Meter or Sensor of a different make - we will only be able to check whether or not it is reading correctly (calibrate), but, we will not be able to open it up and make its calibration right (repair and recalibrate)
Thus, please send us your Vibration Meter and Sensor of a make different than IRD Mechanalysis Limited when you are sure that your meter and sensor, both are in working condition and you have reasonable confidence on its accuracy.



    • Related Articles

    • What Services are Provided by IRD Mechanalysis Limited

      We provide the following services: Training - We conduct hotel-based, in-house and virtual training for professionals on the following topics: Vibration Measurement and Analysis Realibility Centered Maintenance Failure Mode and Effect Analysis ...
    • What is Vibration

      Vibration is around us, everywhere. We are able to see some vibrations and some we are not able to see. Some vibrations we can feel, whereas some we can't. Well, then the question is - What is Vibration? Vibration is defined as the to and fro motion ...
    • How does a Vibration Meter Work?

      A Vibration Meter uses a Vibration Sensor (Accelerometer or Velometer) to sense vibration of rotary equipment. The Mechanical Vibration is converted to an Electrical Signal via the Vibration Sensor and is transferred to the Vibration Meter. The ...
    • Introduction to Vibration Analysis

      What is Vibration Analysis and Why Vibration Analysis? What is Vibration? Vibration is the To & Fro motion of an object from its mean position of rest. In the three dimensional world surrounding us, an object can vibrate in all three dimensions. ...
    • Warranty on Products

      IRD Mechanalysis Limited ("IRD") warrants that the IRD product is free from Manufacturers defects in material and workmanship under normal use. The standard period for this warranty is 12 months from date of dispatch Contents of the Warranty ...