Which Type Tests has IRD8800 passed?
IRD8800 is our flagship Vibration Monitoring System and is API 670 Compliant. The series has been type tested for the following tests in which it has passed and the results are current:
|
Related Articles
User Manual of Generator End Winding Vibration Monitoring System Card M88280 of IRD8800 Series
Attached to this Article is the User Manual of Generator End Winding Vibration Monitoring System (GEWVMS) Card M88280 of IRD8800 SeriesIRD8800 MODBUS Output Register Map
Attached you will find the MODBUS RTU/MODBUS TCP/IP Register Map for Cards of the Vibration Monitoring System IRD8800. This register map applied to all cards i.e M88200, M88210, M88250 and M88280What is the purpose of key phasor module in vibration monitoring system? Can it be used to extract balancing data?
The purpose of the Key Phasor module in a Vibration Monitoring System is to act as the reference point for phase on a machine train. Using this reference point, the vibration phase of other sensors on the machine train can be deduced. Usually the ...Pre-Commissioning Checklist for IRD8800 Generator End Winding Vibration Monitoring System (GEWVMS)/Stator End Winding Vibration Monitoring System (SEWVMS)
Before IRD8800 for Generator End Winding Vibration Monitoring can be commissioned, the following needs to be ensured by Purchaser at site: Sensors within the Generator (Turbine End and Exciter End) have been mounted and their output has been brought ...Tx Fail Relay Contacts in IRD8800 Series Monitoring System
IRD8800 Series Monitoring System is designed to provide Tx Fail Relay Contacts per Module in the event of Transducer Failure (Sensor going bad or fault in cable). These contacts can be used for Annunciation. The TX Fail Relay operates when any ...