How do I set up and install the Flip Drive or the Impulse Drive for the first time in my Riot Kayak Mako 10 Versa?

In these two short videos we walk you through the easy set up and install your pedal drive in the Riot Mako 10 Versa kayak.  If the tracks to hold the drive are not installed we show you how to install these also as your first step.

Flip Drive Installation Video

1. Install tracks (if not pre-installed)

2. Assemble the flip drive pedals as shown in video

3. Install the flip drive in centre notches of track

4. Insert the flat nuts and screw in clamps onto the tracks

5. Secure the Flip Drive in place, lock the clamps down and you are ready to  see you on the water!

Impulse Drive Installation Video

1. Assemble drive plate and install tracks (if not pre-installed) 

2. Place the Impulse Drive onto its plate

3. Insert flat nuts and secure the screw in clamps onto the tracks

4. Lock the clamps down and you are ready to go - see you on the water!
(for assembly of your Impulse Drive and pedals etc for the first time please see video here)

• Related Articles

• How Do I Assembling the Flip Drive for the Riot Mako 10 Versa

  In this short video we show you how to  assemble flip drive pedals and install it into the boat for use.  Remove the long side bolt as shown in the video Slide the pedal into place until bolt holes line up Screw the bolt back into place using a ...

• How do I assemble my Riot Mako 8.5 Air pedal drive fishing kayak for the first time?

  In this 9 min video we walk you through the steps of unpacking your Riot Mako 8.5 Air pedal drive fishing kayak for the first time and setting it up for use. Once you've done this a few times it will take you 5-10 min each time you want to assemble ...

• Could you please tell me the difference between the Riot Mako series flip drive and the Impulse drive & why one would prefer one over the other? 

  Both drives have their pros and cons so can choose the one you prefer the most. The Impulse Drive has a propeller and can go forward and in reverse also to slow down and back up too. The drive needs to be pulled out once you get in shallow water to ...

• Where and how can I order parts for my Mako Kayak Impulse Drive?

  You can order many different parts for your Mako Kayak Impulse Drive.  Please see attached Parts List (PDF) and links to online order page.  You may also find the following overview video of the different parts and maintenance helpful.  

• How do I set up and assemble my Mako or Lost Creek Kayak Impulse Drive

  Please view/download the PDF document link below on steps on how to assemble and set up your Impulse Drive for your Mako Kayak or Lost Creek Kayak.   Important:  when undoing the nuts before installing pedals,  the left side is a REVERSE thread so ...