How do I set layout directions for roll goods at the project level in MeasureSquare Mobile for iPad?

How do I set layout directions for roll goods at the project level in MeasureSquare Mobile for iPad?

In this article, we will show you how to set layout directions for roll goods at the project level.

This article applies to MeasureSquare Mobile App for IOS


It is common practice to compare different layout directions. There are two methods to change the layout direction at the project level.

Method 1: Tap Estimate button on toolbar, and select Set Horizontal Layout/Set Vertical Layout. This adjusts all rooms with the same product application.


Method 2: Tap Estimate button on toolbar, and select Optimize. Under direction, either select "Horizontal" or "Vertical" as layout direction.


Note: After clicking Vertical/Horizontal Layout or Estimate, if there are multiple roll goods, users can select which one or all to be estimated, by checking each product.


Method 3: Tap on a room and select icon i. Then select Layout Direction. Within the room,drag finger to desired direction of layout. Location will be locked until you reset your layout.
  • To change the roll goods layout settings on the cut sheet, open the cut sheet, tap i icon, select Estimate button on toolbar, and change the layout setting.
  • To change the layout settings for roll goods on a global level, tap Settings. Go to System Settings, and select either Carpet Layout Setting or Vinyl Layout Setting.