Changing the IP Address on a Mitrefinch 900 Series clock or Access control unit.
Log into the
Clockâs web server by entering its IP address into the address bar in your
browser.
Click on the
link for Network Settings in the Terminal Setup section of the Main Menu
Click Edit network settings
Amend the IP address/Subnet Mask/Gateway and DNS IP
address as required and click Save.
The terminal will reboot and reconnect with its updated IP address.
Note. Devices that connect via web services may require an IIS reset and a Poller reset to be performed before the Site planner is automatically updated.
If you are not using web services, then the Site planner will require a manual update before the clock can be polled.
Related Articles
Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit via web services.
Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit. NOTE: This method applies to terminals that connect via full web services. NOTE: Before proceeding, ensure that the terminal has been polled up-to-date ...Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit.
NOTE: This method does not apply to terminals that are set up to use Full web services. See other document for this method. NOTE: Before proceeding, ensure that the terminal has been polled up-to-date and that the Poller application or service that ...Changing terminal network settings
Changing terminal network settings The Mitrefinch MF500/700/900 series terminal uses a special menu to set up the basic terminal functionality. The main keys normally have an icon next to them to represent the function associated with the key. ...Mitrefinch Unit Fault - Customer Checklist
Mitrefinch Unit Fault - Hardware Checklist Below are a list of standard questions which are commonly used to fault find mitrefinch hardware issues and will help to determine if the issue can be quickly resolved with assistance from the mitrefinch ...Onsite Report - Mitrefinch Liability Statement
Please read below regarding Mitrefinch’s liability relating to your on site report being used for fire evacuation purposes. This is brought to our attention by your request to connect a fire alarm contact to our TMS system via a clocking terminal ...