Flexipay 2.54 Upgrade Instructions

Flexipay 2.54 Upgrade Instructions


Purpose of this Article


This article outlines the procedure for upgrading the Flexipay payroll software to version 2.54.


Note: This article assumes that you are upgrading from version 2.52 or later. If you are upgrading from version 2.51 or earlier, please contact Mitrefinch Support. If you are currently running Flexipay version 2.51 or below, stop now and contact Mitrefinch Support.


What you should do

Please read the remainder of Section 1, then complete a backup as described here, and finally follow the instructions here to install Flexipay 2.54.


The check list below is provided for your reference. Either make a copy or print this page directly. Please retain and complete the relevant sections as you progress through the various steps of the upgrade process. Start by recording details of your current installation, as they will come in useful during the process. Other pre-installation steps to be completed are below.


Flexipay for Windows® users may check their version number by selecting Help > About Flexipay from the main tool bar.


Note: Before upgrading, please ensure all users have logged off the system and undertake a complete backup of your Flexipay system, including the programs and data. If you do not back up your data and programs, and there is a problem with the upgrade, Mitrefinch Support will be unable to help rectify the problem. This must be a complete backup of the application and data in its entirety, which will need to be carried out by your IT department.


If you have the Mitrefinch HR Manager personnel system linked to Flexipay, you should already have upgraded HR Manager to a suitable version.


The HR Manager versions that support Flexipay version 2.54 are v5.02U build 034 or later, v5.04R build 059 or later, v7.48.6 or later, and v8.27.7 or later.


If you have the Mitrefinch HR Manager personnel system please ensure that all HR users have logged out of that as well.


Upgrade Check List



Chapter 1



Current Flexipay Version




Flexipay system and data has been backed up


(Y/N)


Upgrade summaries



I have read and understood the new features


(Y/N)


Chapter 2



Location of Flexipay (drive and directory)




Location of data (if not held in the \WINPAY directory)




Installation completed


(Y/N)


Data converted (if not held in the \WINPAY directory)


(Y/N)


Backing up Flexipay v2.52 or v2.53


Please make sure all users have logged out of Flexipay, and closed any related programs, so that there is no risk of any data changes between backing up Flexipay and performing the upgrade. If you do not back up your data and programs, and there is a problem with the upgrade, Mitrefinch Support will be unable to help rectify the problem. This must be a complete backup of the application and data in its entirety, which will need to be carried out by your IT department.


Note: If you have Mitrefinch HR Manager software linked to Flexipay, make sure that its programs and data have also been backed up and that everybody has logged out of that as well.



Running the installation program


Before continuing, ensure your data is backed up and that no users are logged into Flexipay.


Note: If you have Mitrefinch HR Manager software linked to Flexipay, make sure that its programs and data have also been backed up and that everybody has logged out of that as well.


Download the new version, copy the zip file to a PC where you can currently run Flexipay, extract the zip file into a new folder, and run the FlexipayInstaller program.


Firstly, the program will check that Flexipay is not running on the PC that is doing the upgradeThe following error message will display if Flexipay is open:











If this happens, press OK to abort the installation. At this stage, you will need to ensure that nobody is using Flexipay and everyone has logged off the system. Following that, you will need to back up Flexipay once again, as described in Backing up your Data, since your previous backup will not have been complete while other users were still logged onto the system. Return to running the installation program once this has been completed.


If you did not receive this message, then you are able to continue the installation. The following license screen will appear:



















Click I agree to continue, and you will be shown a screen that allows you to choose the installation type.



















By default, this screen will select Upgrade and confirm your Flexipay installation details. You should not change this. Click Next to continue.


The Flexipay files will now be upgraded. If anyone is using Flexipay this will block the upgrade and again the following message will display:











If this happens, press OK to abort the installation. At this stage, you will need to ensure that nobody is using Flexipay and everyone has logged off the system. Following that, you will need to back up Flexipay once again, as described earlier, since your previous backup will not have been complete while other users were still logged onto the system. Return to running the installation program once this has been completed.


If you did not receive this message, the Flexipay files are updated then the following screen will appear:
















This screen displays the names of each of the data directories to be converted, and will display their current versions. If a directory is not visible, it is because it is not located in your WINPAY directory. These should be converted manually later, which is completed in converting data directories. However, you should complete the directories that do appear first.


Note: If any directories do not show version 2.52 or later, please stop the installation process at this point and contact Mitrefinch support.


Click the OK button to convert the data. An information screen with Conversion complete will display once the process is finished. Click OK to continue. This process may repeat several times, until every directory has been successfully updated to version 2.54. If that is the case, simply repeat until the following screen appears:























Once you reach this screen, the upgrade is complete. Click Close to close the installer. If, before this point, a report appears during the data conversion, please make a copy of the report and contact Mitrefinch Support, who will assist accordingly.


If you are in any doubt as to the status of the upgrade, or any messages unfamiliar to you appear that are not listed in this document, please contact Mitrefinch Support.



Converting data directories that are not under the WINPAY Directory


Before you start, ensure that the data in these directories has been backed up. 


When LOCALCFG is open, you will see this screen:















Make a note of the information that is currently in the Data directory field, you will need it later.


Once you have made a note of the current Data directory path, press its ‘’ button and navigate to the directory that you wish to convert. For example:


L:\DATA\


Click OK, make sure the instruction below will be completed at the end, then return to running the installation program.


Note: Once the data directory has been converted, and the process is repeated for any other directories that you wish to convert, make sure you return to LOCALCFG and set the path back to its original text. This will ensure that your system operates in the same way that it did before the upgrade.


    • Related Articles

    • Flexipay 2.56 Upgrade Instructions

      Purpose of this Article This article outlines the procedure for upgrading the Flexipay payroll software to version 2.56. Note: This article assumes that you are upgrading from version 2.54 or later. If you are upgrading from version 2.53 or earlier, ...
    • Flexipay version 2.53 upgrade instructions

      Introduction Purpose of this article This document outlines the procedure for upgrading the Flexipay payroll software to version 2.53. Note: This booklet assumes that you are upgrading from version 2.52 or later.  If you are upgrading from version ...
    • Flexipay version 2.52 upgrade instructions

      Introduction Purpose of this article This document outlines the procedure for upgrading the Flexipay payroll software to version 2.52. Note: This booklet assumes that you are upgrading from version 2.49 or later.  If you are upgrading from version ...
    • Flexipay backup instructions - Depersonalised

      How to create a Depersonalised Flexipay Backup Flexipay has a facility to create a depersonalised copy of your data whereby all personal data such as names, addresses, NI numbers and bank account numbers will be randomised.   The original data will ...
    • Flexipay RTI

      Introduction  This document contains information on the different aspects of RTI including preparation, procedures, and changes that were added within Flexipay version 2.32 and reference material. The Real time information section provides ...