GPS clocking location from a mobile phone
How to enable GPS clocking location from
a mobile phone
The following TMS version 7 and 8 instructions
explain how to enable GPS locations when clocking from a mobile device:
Sign into TMS as the MASTER user.
2. Click on System
3. Employee Profiles
4. Highlight Profile
6. Turn on the functions below
"TMS FOR MOBILE OPTIONS" as shown below:
7. Press OK
8. If using the mobile app,
enable GPS and save.
9. SYNC the mobile phone and
10. If that doesn't work, then
an additional step will need to be performed by your IT to run an IISRESET
to push the change through.
Overview If the Web clocking feature has been enabled for you and you are allowed to make TMS clockings, you will be able to use TMS to clock in and/or out. Access to the relevant clocking page is available from the drop-down Header pane by clicking ...
Location mapping for Clockings
When making Clockings in TMS 8, it is possible to record the longitude and latitude of your clocking device’s location. Supervisors can then inspect these Clockings, and see where the Clocking was made from. Previously, when inspecting a Clocking, a ...
SMS Clocking with Esendex
Introduction This guide is intended to help set up SMS clocking on your TMS 8 system. This feature can be used by Employees to register Clockings using their mobile device via SMS messages. This is achieved by using a service called Esendex which ...
Overview TAS is the Mitrefinch Time Allocation System for recording details of the jobs or tasks you perform. If the Web clocking and TAS clocking features have been enabled for you, you will be able to make TAS clockings. Access to the Clock TAS ...
TAS is the Mitrefinch Time Allocation System for recording details of the jobs or tasks you perform. If the Web clocking and TAS clocking features have been enabled for you, you will be able to make TAS clockings for your selected Employee. Access to ...