How to Change the Name Displayed on the Terminal

How to Change the Name Displayed on the Terminal

Here are the steps to change the name displayed on the Terminals.
The number of times that you will need to do this is dependent on how many different configuration files you have in use with the Terminals.
It may only be ONE configuration file, or it may be many.

From WINTMS
Go to Launch> Site Planer
Then from EACH Terminal> Right Click> Details
This will open the Terminal Details Panel
Go to the bottom section of the panel where t show the name of the Configuration File for the Terminal> Click on EDIT
The Configuration panel will now open.
Click on the Configuration from the Menu Bar and select Terminal Messages



Then on the Terminal Display Message screen, select the Idle Message line and change the Name that displays on the Terminal.



Then make sure that you CLOSE and Save EACH Step, going out.

Repeat this process from each Configuration File.
There may be ONE, or there may be a few.

    • Related Articles

    • Changing terminal network settings

      Changing terminal network settings     The Mitrefinch MF500/700/900 series terminal uses a special menu to set up the basic terminal functionality. The main keys normally have an icon next to them to represent the function associated with the key. ...

    • Spring Time Change - North America

      On Sunday March 10th 2019 the clocks will be going FORWARD by 1 hour as part of Daylight Saving Time. The purpose of this document is to ensure that all of your Mitrefinch Terminals are correctly updated with the adjusted time on Sunday morning. The ...

    • How to deactivate and reactivate the terminal webpage.

      The ability to deactivate the terminal webpage has been added to firmware version 7.48.5.1 in response to concerns about the theoretical security risk of running PHP version 5.6.38 which is used to power the terminal webpage. Once the firmware has ...

    • Terminal Site Planner

      The Terminal Site Planner allows you to view and maintain scheduled jobs on the clocking terminals. To open the Terminal site planner, select the Terminal site planner icon from the Dashboard. The Terminal site planner displays a list of terminals. ...

    • How to Download an Employee to the Terminals

      To down the employee to the Terminals; Select the Employee in WINTMS From the Employee Menu, Select the option Download Current Employee