Preparation steps for field upgrade

Preparation steps for field upgrade

  1. Burn a Ubuntu Server 16.04 install DVD disc.  Download the disc image from http://releases.ubuntu.com/16.04/ For a Protel 2106 or 3510 wall mount, use the 32-bit i386 server install image. For all other Protel models, including the 3510 1u rack mount, use the 64-bit AMD64 server install image.  Now you will need to determine if your PBX server will boot from a USB drive:
  2. Connect a USB keyboard and an appropriate video monitor to the PBX.  Depending on your PBX hardware, the monitor connection may be VGA, DVI or HDMI.
  3. Connect a USB DVD drive to the PBX, with the Ubuntu install disc inserted, and reboot the PBX. 
  4. When the motherboard splash screen appears on the monitor, press F2 to enter the server BIOS menu, and navigate to the boot options screen.
  5. If the USB DVD drive appears in the boot menu as an option, you are now ready to proceed with a guided field upgrade session.  Please schedule this with nexMatrix support at 855-639-6287.


If your PBX server does not present the USB DVD drive as a boot option, you will need to follow these steps:

  1. Obtain an internal (SATA) DVD Drive.  You will need a Molex-to-SATA power adapter cable like this one:

  • You will also need a SATA drive data cable like this one:

  1. Disconnect the power cable from the PBX and remove the case cover.  Locate an unused Molex power connector in the cable bundle coming from the power supply, and connect the DVD drive to it.  
  2. Locate the SATA cable that is connecting the PBX internal hard drive to the mother board, then connect another SATA cable from the DVD drive to any open SATA port - adjacent to where the hard drive is already connected.  
  3. Connect a USB keyboard and a video monitor to the PBX.
  4. Power up the PBX, which should now also power the DVD drive.  Insert the Ubuntu install disk and close the tray.  Power down the PBX, then power it back up again.  The PBX should automatically boot from the DVD.  If you see the normal boot sequence on the monitor, and not the Ubuntu install screen, you will need to adjust the PBX server BIOS to force a DVD boot.  Reboot the PBX and press F2 when you see the splash screen.  Navigate to boot options and select the DVD drive.
  5. When you see the Ubuntu install screen, you are ready to proceed.  nexMatrix support will guide you through the remainder of the OS installation process.
    • Related Articles

    • Field Upgrade Process

      To upgrade a Protel v3 PBX to version 4, the disc drive must be wiped clean and a new server operating system installed on it. Follow the preparatory instructions here During your field upgrade session, a nexMatrix support technician will guide you ...
    • Why upgrade to version 4?

      The Protel LTS PBX application runs on Linux Ubuntu Server as its base operating system. Protel LTS version 3, first released in 2013, requires Linux Ubuntu 12.04.  This version of Ubuntu reached end-of-life in June of 2017, and as of January 1, ...
    • Installation Steps for Ubuntu Server

      The Protel LTS software can be installed onto any bare-bones computer if it meets these minimum hardware requirements: Dual-Core CPU, 64-bit AMD architecture 8 Gb RAM Solid State (recommended) or standard hard drive with a minimum capacity of 50 Gb ...
    • 11/21/2016 Upgrade to v4 + new features

      There have been several feature and function enhancements released for Protel LTS recently: PBX “About” page:  Use this link to display which Protel Version your PBX is running, along with OS and kernel versions. Server NAT Settings:   Greatly ...
    • Auto Attendants - Complete Programming Guide

      OVERVIEW Auto Attendants, sometimes called IVR (Interactive Voice Response), are a useful and versatile component in any PBX dialplan.  Commonly, they are used to play messaging and allow callers to direct calls by pressing number keys on their ...