ISTAP/ISTAD - Can't connect to BMW F series
Suggested fix for BMW F
series using the certified ENET cable
Make sure your laptop battery is above %70.
-Make sure you BMW battery is fully charged, hooked up to
a float charger or the engine is running.
Check your NIC settings and VCI settings, here is how:
-Try to set
it as the following:
-VCI setting should like this:
Click on the ‘wrench’ icon at the
top task bar of Rheingold ISTA/D and set the VCI settings as following:
The third option at the left:
Dealer organization ICOM /ENET local area network.
Related Articles
Work Sequence - Proper steps for a successful connection (BMW E & F series)
Work Sequence - Proper steps for a successful connection (BMW E & F series) Work sequence for BMW E series w/K+DCAN Cable: - Windows firewall MUST be OFF. No Anti-Virus software must be present, disabling won't help. UAC set to low. - Connect the ...
ISTAD - Can't connect to BMW E series
suggested fix: -Make sure your laptop battery is above %70. -Make sure you BMW battery is fully charged, hooked up to a float charger or the engine is running. Make sure you setup the driver settings as below (after you install it) Control panel à ...
ISTAD and ISTAP Capabilities/Features
The ISTAD will cover the faults reading, diagnostics, battery registration and calibration tasks for all E, F, G and i series. The ISTAD PRO will cover BMW group F & G series approved coding and programming tasks. The ISTAP will cover ...
ISTAD - Tried everything and still can’t connect
Suggested fix (for ISTAD connection issues): Remove all the diagnostics application you already have on your laptop including Rheingold and BMW tools. - Click on start ? regedit in the search bar ? access your registry keys editor ? computer ...
Can't connect to BMW E39
BMW E39 builds from September 1995 till June 2003 (sedan). For 2001 and older, make sure to use the certified ICOM C to connect to the DME port under the hood, see below: For 2001 and newer , make sure you select EDIABAS under the VCI settings tab ...