Foot Pedals
My AirTurn foot pedal isn't working. Is it a problem with OnSong?
We hear from users from time to time who have issues with their AirTurn pedal. For the most part, if the foot pedal is paired correctly and successfully, it will "just work" in OnSong and you can assign actions. Here are some things that you can try ...
How do I reset my Flic 2?
If you want to reset you Flic 2 to another device, you will need to do the following steps. First be sure the device you paired the Flic too is turned off. Then take the back off the Flic 2 and remove the battery for at least 5 seconds. Turn on ...
How can I change my foot pedals to perform different actions?
First, must foot pedals have a default function. This is typically set to scroll up and scroll down so that you can completely navigate through your songs and sets with two pedals. To change this function, open the Actions Editor by tapping on the ...
What can foot pedals do in OnSong right out of the box?
OnSong is designed to make the most out of the few pedals you have. Out of the box, most pedals will use the left pedal to scroll up and the right pedal to scroll down. Additionally, when you reach the top or bottom of the song, a further pedal press ...
Does OnSong work with Donner foot pedals/page turners?
Unfortunately, Donner foot pedals are NOT officially supported by OnSong. They may or may not work/be configured within OnSong, but since they are not officially supported by OnSong, we have no means to test or troubleshoot with them, and we cannot ...
Why won't my keyboard appear when my iRig BlueTurn foot pedal is connected?
The iRig BlueTurn is recognized by your device's iOS as a keyboard attachment. This is why your keyboard does not come up. If you want your keyboard to show when the BlueTurn is connected, simply press and hold in the left pedal for 3 seconds. This ...
What do foot pedals do in OnSong, and where can I buy them?
Many people find foot pedals extremely helpful in making OnSong even more productive and efficient for them. You can use foot pedals to perform simple tasks like scrolling up and down your songs hands-free, or you can use foot pedals to control more ...
My BT-200 AirTurn pedal isn't configuring with OnSong.
It is possible that your pedal is set in an improper mode. Try the following steps and see if they help you, 1. Reset your pedal to factory default. You can find the information needed in the ...
How to setup iRig BlueTurn.
To use the iRig Blue Turn in OnSong, the pedal needs to be in Mode 1. Here are steps on how to accomplishing setting up the iRig BlueTurn. 1.) Go into the bluetooth screen on your device. 2.) Tap and hold in the up arrow and then switch the device ...
How can I use a PageFlip foot pedal with OnSong?
OnSong support a number of foot pedals including products by PageFlip including the PageFlip Cicada, PageFlip Butterfly, PageFlip Firefly, and PageFlip DragonFly. Follow the directions provided by the manufacturer to connect the PageFlip pedal to ...
How to setup iRig Blueboard.
The iRig BlueBoard from IK Multimedia is a wireless MIDI foot pedal that can be configured to work with a wide variety of apps including OnSong. Because this is a MIDI device, you will need to purchase the MIDI add-on. To do this, open the ...
How do I get the on-screen keyboard to display while using foot pedals?
Most wireless foot pedals work by emulating a computer keyboard. When a computer keyboard is connected to an iOS device, it automatically disables the on-screen keyboard. Most foot pedals have a feature which will "eject" this keyboard, allowing the ...
Airturn Stomp 6 FAQ
Thank you for your interest in the AirTurn STOMP 6. OnSong is proud to be an exclusive launch partner for the AirTurn STOMP 6. Thank you for your patience as this product has just been launched and manufacturing and distribution are just getting ...
How can I configure my iRig Blueboard to send MIDI over Bluetooth?
The iRig Blueboard from IK Multimedia support Bluetooth MIDI. If you have an older BlueBoard, you may need to update the firmware. With Bluetooth MIDI enabled, you won't need to run the BlueBoard app in the background to use the device. However, ...
How do I stop going to the next song when using foot pedals?
When using foot pedals, OnSong automatically advances to the next song in the song viewer when you press the scroll down pedal after reaching the end of the song. You can also turn off this feature by going into the Foot Pedal Setup screen by tapping ...
When I reach the end of a song in a set, I have to push the foot pedal two times to go to the next song.
The feature is called Bumpers and prevents users from accidentally going to the next song in the set. The bumper appears when you reach the beginning or end of the song and indicates what will happen when you press the foot pedal again. You can ...
Why isn't my foot pedal working?
It is possible that your pedal is not set to the proper mode. Please check the user's manual for your pedal to determine how to change the mode to iOS specific (usually Mode 2). You can access the user manual and video tutorials for your product by ...
OnScreen keyboard is not showing
Most wireless foot pedals work by emulating a computer keyboard. When a computer keyboard is connected to an iOS device, it automatically disables the on-screen keyboard. Most foot pedals have a feature which will "eject" this keyboard, allowing the ...