Floating License: Missing Security Device / Module not Enabled

Floating License: Missing Security Device / Module not Enabled

Floating License: Missing Security Device / Module not Enabled
‚ÄčCheck with IT that the server where the dongle is connected, is online and accessible. Also, ask them to check your CodeMeter Control Panel -> WebAdmin web page to see if the server appears in the list at the bottom of the web browser. Worse case, try plugging the dongle into your PC locally. This will prove whether it is a network issue or not.




    • Related Articles

    • CodeMeter Network License Setup (Floating License)

      CodeMeter Network License Setup (Floating License) Outline It is necessary to install the Server-side first, then the Client side. There are two sections below. Also, to assist in monitoring the license use, the last (third) section outlines how to ...
    • Using a CodeMeter network license in a Virtualized Server Environment

      Using a CodeMeter network license in a Virtualized Server Environment ​Preface Certain end-users will want to share their CodeMeter licenced-OPTICAM software across a network/enterprise. This is possible using an optional network license that ...
    • Checking your license is active/accessible

      Checking your license is active/accessible ​Symptom: Remedies: 1) Check your key (dongle) is connected to your PC. You should see it in the CodeMeter Control Panel.       - To start the Control Panel, in Windows 10, type "Code Meter Control Center" ...
    • Retrieving your Dealer license

      Retrieving your Dealer license ​Yearly, around June 1st, the dealer licenses are renewed for appropriate users.  To get the new password for the following 12 months, go to: http://license.camtek.de/en/ Remove the "en/" text in the box shown below: ...
    • Codemeter License Good but Program not Opening

      If you have checked and verified that the dates are correct for the license and everything else looks good you will want to check the system times on the PC and CMContainer in the CMContainer dialog. As you can see in the above picture the System ...