OPTICAM/OPTICAM Classic is slow to start (Network License)

OPTICAM/OPTICAM Classic is slow to start (Network License)

OPTICAM/OPTICAM Classic is slow to start (Network License)

Please ask your IT to check the CodeMeter server IP/host name in the CodeMeter Control Center's WebAdmin page, on each client. It could be it is looking for another server first, then timing out before finding the correct server. 

Open the CodeMeter Control Panel:
      This is running in the system tray, near the clock or in the Windows Search Bar, look for "CodeMeter Control Panel". 
      Click the "WebAdmin" button.
      Check the Server's IP or hostname is correct for the license server.



In this case above, it is 127.0.0.0, but you should see a host/IP that matches the server's. It should be at the top of the search like - use the "up" arrow that appears to move it to the top.

After ensuring it is correct, to test it is accessible, select it here:



      ... you may need to “Use IP-Address”. Then, you’ll see the options on the license here:



Launch OPTICAM/OPTICAM Classic to see if it loads faster.

Camtek OPTISOLUTIONS Tech Team

    • Related Articles

    • OPTICAM/Nucleo is slow

      OPTICAM/Nucleo is slow Should OPTICAM/Nucleo start slowly or be slow to respond to dialogs or at start-up - check the following: 1) The PC is up to the necessary specification. 2) The PC isn't a notebook that is using an integrated Intel graphics ...

    • CodeMeter Network License Setup (Floating License)

      CodeMeter Network License Setup (Floating License) NOTE: Installation of the floating license option may require an IT specialist who is familiar with the network security on your particular network. Firewalls and other factors such as port blocking ...

    • Using a CodeMeter network license in a Virtualized Server Environment

      Preface Certain end-users will want to share their CodeMeter licenced-OPTICAM software across a network/enterprise. This is possible using an optional network license that "floats" the software on the LAN. The license can serve just one seat or "x" ...

    • Connecting to our CodeMeter Server

      1) Create a VPN connection       The server address is: codemeteroptisolutions.asuscomm.com       or, if no success, try: codemeter.optisolutionsusa.com       VPN Type: Point to point Tunneling Protocol (PPTP)       User: <provided via email>       ...

    • Installing a new license or updated license

      Installing a new license or updated license PREREQUISITE: You will need to log in as an administrator before installing the license. OPTICAM or OPTICAM Classic must be installed first. At the minimum, the CodeMeter runtime must be installed ...