How to install Ear Bud Fins

How to install Ear Bud Fins

This describes how to install Ear Bud’s with the Fin’s. The fins help secure the ear bud to the ear and not allow them to slide out as easily. To install the Ear Buds with Fin’s please find the ear fins which should be in a small bag in the main box or in the small box of accessories.




Remove the fins from the packaging, there is a Left and a Right Fin. Although hard to see it is embossed on the Ear fin with a L or R. The picture below should the orientation when laid out.




Remove the current ear bud from the headset by lightly grasping the ear bud at the end and pulling the ear bud off the post.

Take the Ear Bud Fin for the side you are working on and lightly push the ear bud post into the back of the Ear Bud Fin, a slight pop will be felt when it seats.

Do the same for both sides.

To install the Ear Bud Fin in the ear the Ear Bud sits in the ear as any other ear Bud, the Fin should sit Up and into the upper ear flap.

Adjust until the assembly is comfortable for your particular use.

    • Related Articles

    • Noise Cancellation

      The OV Pro uses Active Noise Cancellation (ANC) which electronically helps to cancel noise to the ear through the ear bud however the better the fit in the ear the less noise that will penetrate around the ear bud the better. 

    • Noise Cancellation

      The OV Exec uses Passive noise cancellation. For best noise cancellation the better the fit in the ear the more noise will be let though. For best results, use the comply foam ear tips which create a better seal.

    • Using the OV Exec Headphone Controls

      Connecting the ear bud to the neckband Connect the earbud kit 14-pin connector to the neckband with the Chrome facing to the back To power on Long press (press and hold) the Power button You will also hear the power-up notification ‘power on’ To ...

    • Downloading OV Loop Application

      Before you download the app, make sure you have the information needed to get started with OV and your device’s software is up to date. Note: The OV Loop app is free, but you may be required to set up billing info with Apple or Google in order to ...