OVLoop

            Pairing You OV Exec to a Bluetooth Device

            To pair the headphones:



            • Hold the Play/Power button to turn on OV Exec
            • Enable Bluetooth pairing on your mobile device
            • Select “OV” from your list of available devices


            Pairing Instructions for iOS (iPhone, iPad, iPod Touch)
            • Make sure your mobile device’s Bluetooth is on through your device settings
            • Turn on your OV EXEC by pressing and holding the power button
            • Search for nearby devices.  Your OV Headphones should appear on the list after a few seconds. It will appear as “OV-xxxx” where xxxx = OV device number
            • Select your device once it appears
            • Once you select your OV, a numeric code may be displayed on your device
            • (Optional) Enter the numeric code, pairing is now successful
            • Your OV is now paired and connected to your iPhone, iPad or iPod Touch device

            Note: Ensure that there is no audio cable plugged into OV

            Note: When using the OV Application you will see two (2) bluetooth connections for the same headset, this is normal

            Once connected, you can now open the OV Loop app.



            Pairing Instructions for Android (phone or tablet)

            • On your Android device, turn Bluetooth On from the Settings menu
            • On the Android device’s Bluetooth menu, select ‘Search for Devices.’  Your OV should appear in the list after a few seconds. Note that new devices appear at the bottom of the menu, so you may need to scroll down. It will appear as “OV-xxxx” where xxxx = OV device number
            • Select your OV once it appears
            • Once you select your OV, a numeric code will be displayed on your device
            • (Optional) Enter the numeric code. Pairing is now successful
            Note: Ensure that there is no audio cable plugged into OV
            Note: On some devices, you may need to select the settings of the Paired Device (symbol on the right) and verify that ‘Call audio’ and ‘Media Audio’ are set to On

            Once connected, you can now open the OV Loop app



            Updated: 21 Feb 2019 03:25 AM
            Helpful?  
            Help us to make this article better
            0 0