POS: Setting Station Mode
This article show you how to set the default behavior for Takeout, Dine-in, & Delivery orders on your POSTo change the default behavior of a POS device:
This article show you how to set the default behavior for Takeout, Dine-in, & Delivery orders on your POS
1. Click 'Station Configuration' on Home Panel and enter your access code
2. Click on 'General Settings'
3. Locate Station Behavior or 'Please select how you would like this station to behave.'
4. Choose the appropriate mode for your POS station
Related Articles
POS: Setting Station Modes
Depending on how you're using a station, you may want to streamline its interface. For example, if you're only using a particular station to monitor delivery orders. You could set it in Delivery Dashboard Mode to quickly display your Delivery Orders ...Software: How to Re-Install POS Software
This Knowledge article will explain process of re-installing your POS Software. Step 1: POS Credentials Ensure you have the following information handy: Cloud Username (POS Username) Cloud Password (POS Password) Production Server Step 2: Backup ...POS: Dual Screen Media Selection
Steps to add an image or video file to your dual screen: Select Station Configuration from the login screen of your POS Choose Dual Screen / Kiosk Setup from the available options Scroll down to the section titled, "Image and video selection" Check ...POS: Setting Up a Virtual Drawer
Setting Up a Virtual Drawer In the article, we will show how to set up a virtual drawer to allow a POS to connect to another POS with a cash drawer On POS that has a physical cash drawer, click the cloud icon and write down the Licensee ID before ...POS: "Connect Error" on POS from A920 PAX Device
If you receive the error message: "Connect Error" on the POS from the A920 PAX Device: Power cycle the credit card reader Hit "Cancel" when "Setup Wizard" pops up You may have to swipe to the right on the bottom of the screen Verify the IP address is ...