FAQ: What models of iPhone and iPad can I use Roon with?

Roon Remote is available in the App Store. It requires a minimum operating system of iOS 11 and is compatible with the following models:

iPhone

1. iPhone SE 
   
2. iPhone 6/6+/6s/6s+
3. iPhone 7/7+/7s/7s+
   
4. iPhone 8/8+/8s/8s+
   
5. iPhone X
   
6. iPhone XS/XR/XS Max
   
7. iPhone 11/11 Mini/11 Pro/11 Pro Max
   
8. iPhone 12/12 Mini/12 Pro/12 Pro Max
   
9. iPhone 13/13 Mini/13 Pro/13 Pro Max
   
10. iPhone 14/14 Mini/14 Pro/14 Pro Max
    
11. iPhone 15/15 Mini/15 Pro/15 Pro Max

Note: As of April 2024, Roon does not actively test on devices older than the iPhone 6 (released Oct. 2014)

iPad 

1. iPad 5th, 6th, 7th, 8th, 9th, 10th generation
   
2. iPad Air 1/2/3/4/5
3. iPad mini 2/3/4/5/6
   
4. iPad Pro (All models to date) 

Note: Roon Remote requires an active Roon membership, and a Roon Server running on the same network. 

Older iOS devices before iOS 11 are not supported as they either lack a 64-bit CPU or an OpenGL ES 3.0 capable GPU.

• Related Articles

• FAQ: Which zones can I control remotely?

  What kinds of outputs can I control remotely in Roon? You can use Roon to remotely control anyzone, including: Outputs connected to your Roon Server Outputs connected to devices or computers that are running Roon as a remote Outputs connected to ...

• FAQ: Can I use my Meridian Sooloos 2.1 music and database with Roon?

  It's easy to migrate your Sooloos library and playlists over to Roon! While Roon is not able to talk with Sooloos storage devices directly, Roon is able to read from nearly all local and network storage devices. To access your music and playlists, ...

• FAQ: What Android devices can I use Roon with?

  Roon can run on many Android devices that meet the following requirements: ARM or x86 based Android 5.0 or higher Supports OpenGL ES 3.0 Android devices that are at least 8 inches run the full Roon interface. Tablets smaller than 8 inches run an ...

• FAQ: How do I set up Roon to use my DAC?

  Start in Settings, which you can access by clicking the Navigation button, then clicking Settings: In Settings, click Audio and find your DAC. You should see a big "Enable" button next to it, like I'm seeing here for my DragonFly: Click Enable, then ...

• FAQ: Where can I set a crossfade?

  How To Configure Crossfade You can set a crossfade of 0-10 seconds from the Zone Picker. Click the current zone on the right side of the bottom bar, then in the pop-up window click the speaker icon followed by the gearwheels icon to display the Zone ...