Printing - Configuring Job Handling Codes for Sharp Copiers

Printing - Configuring Job Handling Codes for Sharp Copiers


The following settings must be done on your individual computer profile after YOU have logged into the computer. Because IT does not, and should not, have your password we cannot perform this task on our own. Please follow the steps listed below in order to begin printing.



Steps to Follow

  1. Click on the Windows/Shell logo  on the bottom left of your screen.
  2. Select 
    Devices and Printers. 

  3. Devices and Printers window will appear. Right-click on the desired printer and select Printing Preferences.
     

  4. Select the Job Handling tab. 
  5. Set Authentication to User Number. 
  6. Set User Number to the default code: 11111 OR If you have a permanently assigned print code for your department/county enter it here.  
  7. Set User Name to your name.  
  8. Check the Auto Job Control Review box to enable. 
  9. Click OK to save the settings. 
     




Reasons for performing the above task


  1. You are printing for the first time using an Academy printer
  2. Job Handling box does not appear when you send a print and nothing comes out of the printer
  3. Your computer's login password has been changed
  4. The copier was replaced

    • Related Articles

    • Windows: Configuring Job Handling Code for Sharp Copiers

      How to Access/Reset Copiers Configuring Job Handling Code for Sharp Copier Video Guide: Configuring Job Handling Code for Sharp Copier    The settings below must be done only after YOU have logged into the computer with account credentials, else you ...
    • Macintosh: Setting Copier User Number for a Mac

      Macintosh: Setting User Number for a Mac Copiers: Configuring Job Handling Code for Sharp Copier Video Guide: <NEW VIDEO WILL BE CREATED BY ACADEMY>   Macintosh: Setting User Number for a Mac Copier: Setting User Number for a Mac 1.Open a program you ...
    • Copier Codes (Riverside)

      To evenly distribute the cost of printing and copying, each project has been assigned a new copier code. All the old codes have been deleted. Please enter the code assigned to your project on the chart below.  CDSS…………………………………………….……………4-3296  (FUND ...
    • Copier Codes (Alvarado)

      To evenly distribute the cost of printing and copying, each project has been assigned a new copier code. All the old codes have been deleted. Please enter the code assigned to your project on the chart below.  ...
    • How To Send A Fax With The Copier

      How To Send A Fax With The Copier Login Click on the Fax button At the top left click on Address Book A window will appear. Select LDAC on the left and “Chain Dial with Direct Input” on the right.These steps must be done together for your fax to send ...