How do I switch devices to DHCP?

How do I switch devices to DHCP?

If the devices are connected to ethernet:

1. Attach a USB mouse to the SignStix device.
2. Double right-click to escape from signage mode back to the white Controls page.
3. Make a note of the (static) IP address displayed in the Information section of this page.
4. Right-click again to exit the SignStix Player app.
5. Right-click again to get to the Android desktop (if you're not there already).
6. Click the Settings icon (like a grey cog wheel) at the bottom left of the screen.
7. Click on 'Ethernet'.
8. Click on 'Ethernet configuration'.
9. Under 'Connection Type' it will currently say 'Static IP'.
10. Click the 'DHCP' radio button.
11. Right-click 3 times to get back to the Android desktop.
12. Start the SignStix Player app (click the 6 dots icon to get to the apps page then click the SignStix Player icon).
13. When the Controls page comes up, make a note of the IP address in the Information section.
14. Confirm that the new address (from DHCP) is different to the old static address.
15. Allow signage to start.
16. Check it displays as expected.
17. Re-power the device and check that when it comes up, the Controls page shows a DHCP address again (most likely the same one).

Then in SignStix Director:
18. Log into the SignStix account and check in Device Admin that the device is reporting-in (showing a 'green dot').
19. Expand the device's details then click 'Health Check'
20. Confirm in the resulting report that the 'Updated' time is recent (i.e. later than the point at which the change was made).
    • Related Articles

    • Why isn't my content downloading to devices?

      Check for a download schedule. This was the case for one of our clients where content would only start to download between midnight and 3am. You can override this in an emergency by highlighting the devices and selecting the ‘Overide Download ...
    • How do I assign content to multiple devices?

      1. Go to content> search campaigns and select your campaign 2. Click on 'View assignments' (top left hand corner) 3. Click on 'Toggle filter' (top left hand corner) 4. Select 'include subfolders' and filter by device 5. Select multiple devices by ...
    • How do I upgrade my devices to the latest player version?

      Periodically, new versions of the SignStix Player software are released, allowing for brand new features, fixes, and performance enhancements.  It is recommended that you upgrade to the new versions as soon as they become available.  You can control ...
    • Why are my devices showing as offline in commander but online in Director?

      First try:  The devices are not yet aware that they are "Commander Enabled".  You will have to force the device config update by  doing Edit Settings, Save Changes in Device Admin.  Second try:  See if port 9000 is open from the device ...
    • How do I schedule a black friday sequence?

      Create a sequence in director Add the new Black Friday content to this Black Friday sequence. Create a new Campaign.  Lets call this the Black Friday Campaign. Assign the Black Friday sequence to devices for the Black Friday Campaign.  (You can ...