My video isn’t in the correct orientation on a portrait video wall

My video isn’t in the correct orientation on a portrait video wall

See this article https://www.signstix.com/support/how-do-i-set-up-my-device-for-a-portrait-screen/

 

Upgrade the player version to 3.3.3 and then set hardware rotation in the device page for each device. This was a new feature of the 3.3 release.


    • Related Articles

    • Why isn't my video wall working properly?

      Some of the panels are showing the wrong part of the sign This is very likely to be a device configuration issue.  Locate your device in ‘Device Admin’ and check that its video-wall settings have the correct geometry. Check your measurements against ...

    • Why is my video wall out-of-sync?

      There are a number of reasons why a video wall is playing out-of-sync.  Please try the following methods: Check in the Devices section of your SignStix account that the devices have the correct synchronisation method set. Check in the Devices section ...

    • How to set up a video wall?

      A video wall is a combination of 2 or more screens or panels which have been mounted in a rectangular arrangement.  They operate together as one large canvas for displaying digital signage and video content.   Setting up a video wall is relatively ...

    • I want to use one SignStix player for multiple screens in the video wall

      The standard approach for a video wall is to use 1 SignStix player per panel. This is because the maximum pixels a M12S player can decode is 1920 x 1080. However, this may still be possible using a HDMI splitter and would require testing. In the ...

    • How do I set my SignStix device to portrait mode?

      By default, SignStix devices are set up for screens mounted in a landscape orientation.  They can also be configured for use with screens mounted in a portrait orientation, but the steps for doing so vary depending on the type of device and your ...