How to update the firmware on a Leica D810 Touch laser

• Related Articles

• How to update the firmware on a Leica Disto X3 Laser

  Summary Leica periodically releases firmware updates for the Leica Disto X3 laser. If you experience issues with connectivity or error messages, you should verify that you have the latest firmware, using the instructions below. Note: Updating ...

• How to Setup and use a Leica Disto X3 laser with your Solatech Focus system

  Summary This article describes how to pair a Disto X3 laser to your Windows or iOS device.  It also describes how to transmit those measurements into your Solatech Focus system.  Instructions for Pairing Windows Turn on your X3 laser (Bluetooth is ...

• How to reset a Leica Disto X3 laser to factory defaults

  Summary Occasionally a user may experience issues with their X3 laser that can be resolved through resetting the device to factory defaults. This is always the first step to try if your laser begins to behave oddly. This knowledge base contains ...

• How to setup the Leica Disto D810 Touch to transmit Customer Measurements

  Summary This article will explain the initial setup of the D810 Touch laser and how to use this laser to send measurements into SalesPRO software Instructions Setup of Laser Turn on your D810 Touch (Bluetooth is auto enabled)  . Select the  Windows ...

• Apparent Rounding Errors when using Leica Disto™ Bluetooth® Laser

  Summary The Leica Disto™ Distancemeters with Bluetooth® allow you to set the display resolution to different values, for example to indicate 1/8 inch increments, rather than the native 1/32 inch increments. While this allows a greater ease in quickly ...