Problem: Logo is small when using large fonts in Windows (high DPI)

Problem: Logo is small when using large fonts in Windows (high DPI)

Problem

When you set your Windows system to use large font settings, > 150% for example, this causes the logo and other images to appear small when printed on reports generated from SalesPRO.

Cause

The reason the images appear small is due to the way that the printing engine that SalesPRO uses. When it renders the images on the report it always uses a DPI of 96 (100% font size) instead of the current setting.

Solution

Unfortunately this behavior cannot be changed. The suggested work around is to set SalesPRO to run a normal DPI even if Windows itself is set to use high DPI. This can be done by adjusting the Disable display scaling on high DPI settings on the Compatibility tab of SalesPRO shortcut.

  1. Close SalesPRO.
  2. Right-click on the SalesPRO Icon located on the Desktop.
  3. Click Properties.
  4. Go to the Compatibility tab.
  5. Check the box labeled Disable display scaling on high DPI.

  6. Click OK.
  7. Run SalesPRO.
  8. The application text and images will appear smaller as they will be using normal font sizes (96 DPI), however this will allow images to be rendered normally when printing or previewing reports.

Applies to

  • SalesPRO Software

    • Related Articles

    • How to add a logo which will work for computers using large fonts

      Summary For computers using large fonts (DPI > 100%), logos on Process Reports often were rendered very small.  This Knowledge Base article will describe how to create and use a Logo which will display properly on output. Note:  This requires ...
    • How to Add a Logo to your process Reports

      Summary In this article, you will learn how to add your company logo to the standard process reports (quote, invoice, order confirmation ,etc.). More Information To complete this tutorial you will need your company logo as a picture file. Supported ...
    • How to Add a Logo to your process Reports

      Summary In this article, you will learn how to add your company logo to the standard process reports (quote, invoice, order confirmation ,etc.). More Information To complete this tutorial you will need your company logo as a picture file. Supported ...
    • I cannot print in Windows 10 using Bluetooth even though my machine and computer are paired

      Problem When attempting to print to a Brother PocketJet Printer with Bluetooth, you receive an error message.  Solution Brother has released an updated driver for Windows 10, which restores Bluetooth functionality.  To install the driver, please ...
    • Windows Firewall is not enabled

      Summary Windows Firewall is not enabled. More Information This problem indicates that Windows Firewall, which is installed by default on this computer, is disabled. Any computer that is not running behind a Firewall, software or hardware, is open for ...