Speak-IT Solutions Support
            Knowledge Base Speak-IT Software/Hardware Support Olympus Professional Devices DS-9500

            DS-9500 - Configuring to use a WiFi/Wireless Network

            This section goes through configuring the recorder to connect to your wireless network using the Dictation Module. 

            • Open the Dictation Module
            • Connect the DS-9500 recorder 
            • Click on Tools then click on Options and click on Device. 

            Note: Device setting will not appear if the recorder isn’t connected. 

            • In the left column click on Wireless Network 
            • Select On to enable WiFi. 
            • Click Add and enter the following
              • Network name (SSID)
              • Security Type
              • Security Key. 
            • Click OK 

            Repeat the same steps above if you want to add another wireless network to the device. You can register up to 10 wireless networks.

            Optional: If you want the recorder to send the file when you press the New button, then tick the box “Prompt to send the dictation when the next dictation file is created”.

             Wireless Network

            Now the recorder is configured to use your wireless network the next step is to configure the recorder to download and/or email dictations. 

            Updated: 06 Feb 2019 11:53 PM
            Helpful?  
            Help us to make this article better
            0 0