How do I pair my Pen-grip mouse with a USB receiver?
To pair your Pen-grip mouse to a new USB receiver please follow the steps below:
Only USB charger/receivers can be paired with. If you have a USB charger with orange Swiftpoint branding (as included with TRACPOINT, PadPoint, PenPoint and GoPoint) then you will need to
pair over Bluetooth.
- Ensure your USB receiver is attached to your computer.
- Move the switch on the underside of the mouse to OFF.
- While holding down front button, move the switch to ON.
- Continue holding the front button until the LED changes from orange to green.
- Release the front button and hold the mouse close to the USB receiver. The LED will light up green for a few seconds, once the green light is off, the pairing is complete.
ProPoint is used for the demonstration, but the process applies to all current generation Pen-grip mice.
If you have a previous generation mouse, please refer to the articles below for pairing instructions.
Related Articles
How do I pair with my Pen-grip mouse over Bluetooth?
The pairing process for the Swiftpoint GT is mostly the same as below, but not all of the details apply. So please refer here instead for pairing instructions if you have a GT. To pair your pen-grip mouse mouse to a device over Bluetooth please ...Swiftpoint P3 Control Panel Download (For ProPoint, SurfacePoint, TracPoint, PadPoint, PenPoint, GoPoint & ErgoPoint)
The Swiftpoint P3 Control Panel supports our current generation pen-grip mice including the following models; plus ErgoPoint: ProPoint SurfacePoint TracPoint PadPoint PenPoint GoPoint P3 Control Panel Downloads Windows 10/11: P3 Control Panel ...My pen-grip mouse is paired over Bluetooth but is not reconnecting.
If your mouse is showing in your Bluetooth device list as paired, but is not connecting when you switch it on; one of problems described below could be happening. You should be able to tell which, based on how the light on your mouse responds when ...How do I know if my Swiftpoint Pen-Grip mouse is charging correctly?
While placed on a USB charger, the LED on your pen-grip mouse should respond as follows: The LED will flash rapidly for 30 seconds when it is first placed on the receiver. After this the flashing will continue, but at a slower rate for up to 90 ...Pen-grip Mouse User Guides
A quick-start guide will be included with your mouse, but you can also download PDF versions from the links below. Pen-grip Quick Start Guide & Regulatory Information English - QSG & Regulatory Information ProPoint/SurfacePoint User Guides: English – ...