Presenting Non-Tech Connections Numbers for Outbound Calls

Presenting Non-Tech Connections Numbers for Outbound Calls

Presenting Non-Tech Connections Numbers for Outbound Calls

Non-account numbers can be presented on outbound calls, though by default, the caller ID is your number supplied by CloudPBX provider. Subject to verification that you are the number(s) owner. To verify a number that was not provided by CloudPBX provider contact your provider, they will link the required numbers to your account.

Quick Guide

Step 1: Apply for a Verified Non-Account CLI

  1. Log into https://portal.techconnections.co.nz/ > Voice tab and select the number you want to set up
  2. Select Outgoing Calls > Caller ID & Privacy
  3. Click on the link    
  4. Enter your phone number you wish to present as CLI on your account.
  5. Answer the call and enter the PIN number you are presented with to enter followed by the '#' key.  If succesful you will need to configure the number per Step 2 below
  6. If you are unable to call the CLI back for some reason then you will need to send us proof of ownership of the number by emailing our support team.

Step 2: Associate the non-Tech Connections number

  1. Log into https://portal.techconnections.co.nz/ > Voice tab and select the number you want to associate a non-account number with.
  2. Select Outgoing Calls> Caller ID and Privacy
  3. Choose from the dropdown Verified non-account selection your non-account number
  4. Select Save

    • Related Articles

    • Outbound Trunking

      Outbound Trunking Outbound trunking is a feature that allows you to present other direct dial-in (DDI) numbers as Caller ID on your registered trunk relieving phone administrators the onerous task of individually registering large blocks of ...

    • Can I use the Tech Connections Cloud PBX if my on-premise PBX fails

      Can I use the Tech Connections Cloud PBX if my on-premise PBX fails? Yes, absolutely. · Location: CloudPBX > select number > Inbound Calls · Summary: Setting up a second layer of redundancy on your PBX. · Detail: Leverage our hosted cloud PBX voice ...

    • Can I use my existing phone with Tech Connections?

      As a SIP or VoIP service provider you will require an IP telephone handset to make calls on the Tech Connections network or you can use our Mobiex Apps on your Smartphone.  Commonly used SIP handsets are those by Yealink, Polycom and Cisco/Linksys. ...

    • Call Screening Options

      We all like a little control over whom we take calls from right? We’re used to this on our mobile phones, and call screening is available for you to set up just the way you want in our Cloud PBX. Quick Guide Log ...

    • Tech Connections generic SIP settings for connecting a SIP compliant device to our service

      Customers with their own SIP enabled phone, gateway or PBX are free to use this to connect to Tech Connections's service. The device must be SIP v2 compatible. Refer to the settings below for a guide to how you should configure your device to connect ...