You simply need to configure your computer to obtain an IP address automatically and then connect it to the LAN port on the TeleBlend Gizmo using a straight Ethernet cable.
The IP address range used by the TeleBlend devices are as follows: Innomedia: 192.168.251.2 through 192.168.251.254 Telco Systems AC-211: 192.168.251.2 through 192.168.251.254 Linksys SPA 2102: 192.168.0.2 through 192.168.0.254
The WAN or Internet port on the TeleBlend device needs to be connected to the Ethernet port on your cable modem or router using a straight Ethernet cable.
If computer is current directly connected to your cable or DSL modem, you can connect your computer to the TeleBlend device and then connect the TeleBlend device to your cable or DSL modem. The TeleBlend device has a built in router and therefore you ...
The TeleBlend service is easy to setup and use. You will simply need to connect the WAN or Internet port on the TeleBlend device (Gizmo) to your cable or DSL modem and then power it on. You may have to restart your cable or DSL modem once to get it ...