No Audio on my Mac while usiing the SC Recorder
Mac's are built in such a way that there is no direct access to the audio on the sound card. Therefore, when DS records it has to grab (and redirect) the audio through its digital recorder. When it does that you will not hear audio on your Mac. After completing the recording and stopping the SC Recorder, DS3 will automatically reset your audio settings to where they were before.
Related Articles
I don't hear audio when using the SC Recorder (Mac Users only)
When you use Download Surgeon's SC Recorder module on your Mac, SC Recorder redirects the audio stream through a utility called Soundflower. While the audio is being routed through Soundflower you will hear no audio from your computer. Once you ...
SC Recorder for Mac does not work correctly.
When you open the SC Recorder and begin to use it, you will briefly see a message in the upper left corner of our screen saying it is configuring your machine to use the SC Recording… then it will say it is ready for use. After that you can use the ...
There is no sound when I use the SC Recorder (Mac only)
When Mac users, use the SC Recorder module from Download Surgeon, they will hear no audio. This is simply the way it must be with Mac OS. Mac's don't have sound cards for system audio like Win machines do. Download Surgeon uses a special utility ...
Static when recording audio using the SC Recorder
When you are using the SC recorder and positioning the frame on your screen, it MUST be entirely on your screen. It cannot be to one side or edge where some of the frame is off the screen. If it is, this will cause static or audio distortion. Since ...
SC Recorder Doesn't Work Correctly - Mac Users
The single most common problem with the SC Recorder module on Download Surgeon 2 is the incorrect or incomplete installation of the program. Here is a link to a tutorial which walks you through the steps of this installation. ...