Cannot Connect to NTP Server
This is a common error message that we receive a lot of calls on.
A NTP server is a network time protocol server. Think of it as a master time clock. Your projector and/or server attempts to connect to this master time clock on a regular basis (varies by model) to keep its local time clock (RTC) in sync. Connection to the NTP server is not mandatory and your machine will operate fine without it. We do like to keep the NTP server active as it will keep all clocks set correctly and in sync.
In some systems the projection system is pointed at a local NTP server such as a TMS system or some other NTP server on-site. In other cases the NTP client in your system may be directed to a NOC or even a public NTP server.
On the Christie projector, the NTP settings are located under MENU->ADMINISTRATOR SETUP-?TIME SETUP
In this venue the NTP client pings the NTP server, which is local within the building and located at 192.168.1.20 every six minutes.
We have an updated list of public NTP servers in our knowledge base. You may also try this link:
If you are unable to successfully connect to a NTP server you can turn off the ENABLE NTP setting.
Related Articles
Set Win10 As NTP Server
The following instructions are to used at your own risk. In REGEDIT navigate to: HKEY_LOCAL MACHINE SYSTEM Current Control Set Services W32Time TimeProviders NtpServer Edit Enabled REG_DWORD value from 0 to 1 Before After Close REGEDIT Open ...IMB Server not responding
This is a very common call that we receive. The call is that the (IMB) server is not responding to input from the web GUI. This is a common complaint from servers that use a web browser (Chrome, Firefox, Opera, Internet Explorer or Edge) for ...Dolby DSS Server not keeping proper time
The Dolby server synchronizes with a NTP server (master time clock) when it boots up. If a server is left on for an extended period the time clock will drift. We suggest a weekly reboot of the server. This will synchronize the clock to the correct ...Public NTP Time Servers
Here are some time servers that can be used for the master clocks in servers/IMB's: Google: While the actual URL for the Google public NTP servers is time.google.com, most servers can't handle a canonical domain name (ie. time.google.com), the actual ...IMB Comm Fail(000000:Conn=113)
When an NEC projector displays IMB Comm Fail(000000:Conn=113) message it means that the projector can no longer communicate with the IMB or IMS type server. It is normal for this message to appear when the IMB server is shutdown or rebooting. ...