Dolby/Doremi Server approved drive list

Dolby/Doremi Cinema Server Qualified Hard Drive List

The attached document contains a list of approved/tested replacement hard drives for Dolby/Doremi servers.Dolby/Doremi Approved Drives

    • Related Articles

    • Dolby DSS-200 Power Switch for Hard Reboot

      The Dolby DSS digital cinema server was designed deliberately without a front panel power switch.  This was done by design to prevent accidental turn-off during a presentation.  There are times, however, when a full power cycle is needed to clear a ...

    • Doremi Showvault/DCP-2000 Power Switch Location

      The power switch for the Doremi Showvault/DCP-2000 is located inside of the RAID drive bay on the left side.

    • Dolby/Doremi Server Date reset to 1900's

      There is a known bug in the Security Manager software of certain Doremi/Dolby server models. This bug affects DCP-2000, ShowVault, IMS1000 and IMS2000 servers and some of their variants. Dolby refers to this bug as the Y2K24 bug as what it does is ...

    • Doremi DCP-2000/Showvault - Adding VNC into a server

      VNC into a server     Created on Thursday, 13 December 2012 17:17 To be able to VNC into a server, the server must have had the pkg ingested.  This is not done by default in the factory.  Install pkg: dcp2000_X11vnc-1.10.pkg or for SW 2.6.XX and ...

    • Power Switch Location for DCP-2000 and Showvault

      A common question that we get asked is "how do I turn on my Doremi Showvault or DCP-2000 series server?" Doremi did an amazing job of hiding the power switch from the user. The short answer is that the power switch is behind the front hinged door ...