KDM Not showing up in the server

KDM Not showing up in the server

Customer had replaced IMB earlier this week. Technicolor had issued key with old IMB serial number. If the correct serial number is not listed in the key, the key will not show up as being available to load within the server.

    • Related Articles

    • Server not ingesting or seeing KDM

      When trying to ingest a KDM from a thumb drive, the server does not see the KDM on the drive and/ or will not ingest it. This is a fairly common support call and usually is caused by one of two reasons: 1.  The KDM has been issued with an incorrect ...

    • IMB Server not responding

      This is a very common call that we receive.  The call is that the (IMB) server is not responding to input from the web GUI.  This is a common complaint from servers that use a web browser (Chrome, Firefox, Opera, Internet Explorer or Edge) for ...

    • Set Win10 As NTP Server

      The following instructions are to used at your own risk. ​ In REGEDIT navigate to: HKEY_LOCAL MACHINE SYSTEM Current Control Set Services W32Time TimeProviders NtpServer Edit Enabled REG_DWORD value from 0 to 1 Before After Close REGEDIT Open ...

    • GDC SX-xxxx server showing X at the top of the screen.

      On a GDC SX or SA series server (SX-2000, SX-2100, SX-3000, SX-4000) the information button (i) is replaced with an X.  This is a warning recently implemented in a software upgrade and generally means that the battery (batteries) in the media block ...

    • Server hangs on boot

      On initial boot up, the server hangs on boot and won't complete the cycle.  The screen displays "Non-OS disk" or "Non-Debian disk" inserted message. The most common cause of this problem is that the server booted with either a USB or external hard ...