Touchline Connect
            Knowledge Base REACH Boarding Help Center Access & Security Kiosk

            Locations and how they work in REACH




            Locations are places on or off campus that you can create in order to track student movements.  There is no limit to the number of locations that you can create in REACH.           

            Locations are used in the Sign In / Sign Out (SISO) process to identify where a boarder is moving to.  

            The Locations colour scales are used in the Kiosk View (Student Locator Screen) as the outline to the student image for easy identification of the current student location.

            Location Details

            • Label is the name of the location.
            • Set whether the location is On or Off Campus
            • Set the display Colour for the location
            • Set whether or not the location Requires Boarder PIN
            • Set whether or not the location Requires Staff PIN
            • Shortcode is the 3 digit ShortCode that you can use for this location in small device displays.


            Creating QUICK LEAVE Locations

            For each location you can set some leave defaults that will record a pre-approved leave event for the student when they sign out to that location.  


            This allows you to include an Allowed Time at a location, the the Leave Type Association and the commonly used Transport Type for departure and return and the location.

            If you set the default leave details for a location then REACH will create a Leave Event each time a student signs out to that location.


            The Allowed Time will be used by REACH to determine and report the estimated return time of a student  who has signed out to that location and the student will appear on your Student Movements (Airport) Screen with a designated return time. The setting time is in minutes and you can set different default times for each year group. 


            Setting Leave Default details creates a Leave Event


            When an allowed time is set then REACH will treat the location as a leave event and the student will appear on the Airport view of your portal with their expected return time identified.

             





            Location Restrictions


            For each location you can restrict its availability to any student group or combination of student groups. By using Contact Flags you can even restrict the location availability to an individual.

            Simply select the availability of each location using the filters available.

            image2017-10-1_8-20-28.png
            Updated: 21 May 2019 07:33 PM
            Helpful?  
            Help us to make this article better
            0 0