FAQs About Our Technology

FAQs About Our Technology

How does TriboTEX work?

TriboTEX nanoparticles have two sides, one that binds and one that glides. The grippy side reinforces and strengthens, while the slippery side reduces friction.


Just like carbon in the mantle of the earth, they self-align into a diamond-like armor under the heat and pressure of your engine, grippy side facing in and slippery side facing out. This coating dramatically reduces friction, down to superlubricity levels.


Learn more on our Science page.


Will this work in a new car?

We recommend treating after your break-in period. All vehicles can benefit from the TriboTEX protective coating with superlubricity, but higher-mileage vehicles will experience more dramatic improvements as worn away material is restored.


How long does it last? How often do I need to treat my vehicle?

The treatment is permanent, however the nanocoating will accumulate some wear over time. Our mechanics recommend retreating your engine every 40,000 miles/64,000 km, or annually if you are a heavy user. Semi trucks should be treated annually with our Big Rig formula. 


TriboTEX Transmission treatments last much longer as transmission fluid isn't exposed to outside contaminants like engine oil. Our mechanics recommend treating your transmission every 80,000 miles/128,000 km.


Will this void my warranty?

No. TriboTEX will not cause any damage to your vehicle resulting in warranty claims. Your warranty is also protected by the 1975 Magnuson-Moss Act.


How much do I need?

One treatment is sufficient in most cases. Extra-large or high mileage vehicles may benefit from a second application after the initial application phase (500 mi/800 km).


What is the shelf-life of your products?

If sealed, kept cool, and away from light, it should last a lifetime. If it gets hot, there might be changes in color that does not affect performance. Just shake well for easy dispensing.

    • Related Articles

    • Two-Stroke Oil Injection

      Recommendations: For engines under 150 HP use TriboTEX Mini For engines over 150 HP use TriboTEX Original TriboTEX Original is safe in engines under 150 HP Directions: Add TriboTEX to favorite 2-stroke engine oil Mix well with engine oil before ...
    • TriboTEX Transmission Guide

      How do I use a TriboTEX Transmission treatment? See instructions below. A transmission flush is not necessary before applying. Our mechanics recommend treating every 80,000 mi/128,000 km. Gently warming the tube will improve application. Do not ...
    • Choosing the Right Treatment for Your Vehicle

      TriboTEX Engine is compatible with all engines and oils. All of our formulas contain the same patented nanoparticles, however the concentration and volume has been tailored for different sizes of vehicles. To determine the proper treatment for your ...
    • TriboTEX Engine Guide

      How do I use a TriboTEX Engine treatment? Simply add TriboTEX to your engine oil fill between oil changes. Within 15 minutes, you’ll notice a reduction in noise. As you drive for the next 500 mi/800 km, TriboTEX nanoparticles are forged into a ...
    • TriboTEX Compatibility with Other Commercial Additives

      TriboTEX can work with many commercial additives, however there are some specific methods that must be followed to gain the benefits of TriboTEX nanoparticles. TriboTEX fuses to metal surfaces under impact and friction. It needs a clean surface with ...