How to Connect/Re-connect Scanner

            VisitorRego can automatically detect which COM port a scanner is assigned to.

            You can see the COM port assigned in Devices & Printers or in Device Manager.

            To reconnect the scanner try the following:

            ·         Unplug scanner, then reconnect.

            ·         Restart Windows. 

            If you’ve done this, and you still can’t see a COM port assigned, you  may need to rescan the configuration bar codes.

            See the Scanner - barcode set up article for instructions on configuring bar codes. 

            Updated: 13 Dec 2018 09:38 AM
            Help us to make this article better
            0 0