Cloud Sensor LED Indicator Lights

HardTrack Cloud Sensor - LED Indicator Light Documentation



HardTrack Cloud Senor

Indicator Lights

 

HardTrack Cloud Sensor has (4) LED’s






Remote Manager is a cloud based data repository for the temperature data.  The HardTrack CloudServer picks up data from the Remote Manager at scheduled intervals. 


    • Related Articles

    • HardTrack Mobile User Manual

        HardTrack Mobile User Manual Revision 5.1 April 21, 2021 For further information or assistance, call WAKE's Customer Service Hotline Toll-Free at US (800) 957-5606 or CA: (647) 931-6995 Wake, Inc. reserves the right to alter any of its products or ...
    • How to Switch a Single Sensor on a Project to a Backup Sensor

      An ideal way to set up concrete temperature monitoring with HardTrack, is to attach your backup sensors to the HardTrack Cloud (HTC) Device so that if you need to switch from the primary to the backup sensor, you can do so remotely without any ...
    • How to Install HardTrack Desktop on a new PC for use with HardTrack Cloud Devices

      To install or upgrade HardTrack, you will need to have Administrator authority on your PC. You will receive a link in an email message that will take you to Dropbox so you can download the HardTrack Desktop Installation files.   - Don't worry about ...
    • How to Delete a Sensor from a Project

      Here are the steps to delete or remove a sensor from a Project: 1) Open your Project in HardTrack Desktop 2) highlight the sensor(s) that you want to delete by single-clicking them.  If you hold down the Ctrl-key, you can highlight more than one at a ...
    • How to Add a Sensor Back to a Project that has been Deleted

      If you want to add a Sensor back to a Project, these are the steps to follow: 1) Open your Project in HardTrack Desktop 2) Add the Device that contains the Sensor to your Project.  By adding a Device to your Project that is already added to your ...