How to work with all the Tags/Loggers in a Pour/Project at the Same Time

How to work with all the Tags/Loggers in a Pour/Project at the Same Time

Initialize all the tags for your project
After either adding Known Tags or Scanning for Tags and you have saved your project, you can Initialize all the tags for your project by clicking on Tag, Reuse Tag(s), Reuse All Tags. 

Remember you have to single click on one of the tags in your Project before you can use most of the Tag Menu Options.



At this point in time, all of the Tags in your Project have been initialized for long-distance reading, cleared of all old temperature data logs and Logging has been Started.

Get all of the Tags logging at approximately the same time
To get all of the Tags logging at approximately the same time so that when reports are produced the temperature data appears on the same line of a logging interval, click on Tag, Logging, Restart All
Remember you have to single click on one of the tags in your Project before you can use most of the Tag Menu Options.



Read All of the Tags in your Project
Each time you Read the Tags in your Project, you can read all of them using a single menu option, with your particular project open and after you have single clicked on one of the tags/loggers, click on Tag, Read Tag, Read All Tags:


Stop Logging on All of the Tags in Your Project

When your pour is complete and you need no additional data from the sensors, you can stop all the tags in your project from logging.  Open you project, single click on one of the tags in your project, then click on Tag, Logging, Stop All: