What's in the box? - NodeGrid Serial Console

What's in the box? - NodeGrid Serial Console

NodeGrid Serial Console has 3 models: 

NSC-Txx

NSC-TxxR

NSC-TxxS


Below is the description of the content of the box for each model.


NSC-Txx 

-          NSC-Txx unit

-          2 brackets for 19” rack installation

-          10 screws (5 for each bracket) – the other screws and washers are for hard disk installation (not commonly used)

-          1 or 2 power cords (for SAC or DAC)

-          1 DB9-RJ45 crossover adapter (RJ45 Cyclades pinout – Z000036 – to access Txx’s console port)

-          1 loop-back connector (RJ45 Cyclades pinout)

-          1 ethernet cable

-          1 Quick Start Guide

-          1 Safety Sheet


NSC-TxxR 

-          NSC-TxxR unit

-          2 brackets for 19” rack installation

-          10 screws (5 for each bracket) – the other screws and washers are for hard disk installation (not commonly used)

-          1 or 2 power cords (for SAC or DAC)

-          1 DB9-RJ45 crossover adapter (RJ45 Cyclades pinout – Z000036 – to access T48R’s console port)

-          1 DB9-RJ45 straight through adapter (RJ45 Cisco pinout – Z000015 – to connect a device with DB9 console port to the T48R serial port)

-          1 loop-back connector (RJ45 Cisco pinout)

-          1 ethernet cable

-          1 Quick Start Guide

-          1 Safety Sheet


NSC-TxxS

-          NSC-TxxS unit

-          2 brackets for 19” rack installation

-          10 screws (5 for each bracket) – the other screws and washers are for hard disk installation (not commonly used)

-          1 or 2 power cords (for SAC or DAC)

-          1 DB9-RJ45 crossover adapter (RJ45 Cyclades pinout – Z000036 – to access T48R’s console port)

-          1 DB9-RJ45 straight through adapter (RJ45 Cisco pinout – Z000015 – to connect a device with DB9 console port to the T48R serial port)

-          1 loop-back connector (RJ45 Cisco pinout)

-     1 loop-back connector (RJ45 Cyclades pinout)

-          1 ethernet cable

-          1 Quick Start Guide

-          1 Safety Sheet

    • Related Articles

    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...

    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...

    • Power Control within Serial Session

      Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...

    • How to Telnet and SSH to the Nodegrid Serial Ports

      Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...

    • Can I Cascade NodeGrid Serial Console Units?

      NodeGrid Serial Console (NSC) serial console server is able to share network ports with fellow devices, sharply reducing network switch port usage for OOB device management. This new port saving feature is already reliably and securely saving many ...